ATHIYAMAN ACADEMY brings you today’s TNPSC Daily Notes on Gas Laws and the Mole Concept — Boyle’s law, Charles’s law, Gay-Lussac’s law, Avogadro’s hypothesis, the ideal gas equation PV = nRT, Dalton’s law of partial pressures, Graham’s law of diffusion, the Avogadro number, molar volume at STP, the compressibility factor and the van der Waals equation. These bilingual study notes, with 15 key points, detailed notes in English and Tamil, 5 practice MCQs and memory tricks, are prepared for TNPSC Group 1, 2, 2A, 4 and VAO General Science (Standard XI Chemistry, Unit 6).
அன்றைய TNPSC தினசரி குறிப்புகள் — வாயு விதிகள் மற்றும் மோல் கருத்து: பாயில், சார்லஸ், கே-லூசாக் விதிகள், அவகாட்ரோ கருதுகோள், இலட்சிய வாயு சமன்பாடு, டால்டன் பகுதி அழுத்த விதி, கிரஹாம் பரவல் விதி, அவகாட்ரோ எண், STP மோலார் பரும அளவு, அடக்கத்திறன் காரணி மற்றும் வான்டர்வால்ஸ் சமன்பாடு. TNPSC குரூப் 1, 2, 2A, 4 மற்றும் VAO தேர்வுகளுக்கான இருமொழிக் குறிப்புகளை அதியமான் அகாடமி வழங்குகிறது.
⚛ Gas Laws & the Mole Concept — வாயு விதிகள் மற்றும் மோல் கருத்து
Why the gaseous state carries weight in TNPSC papers
Of the three states of matter, the gaseous state is the one the TNPSC General Science paper returns to most often, and for a reason that has nothing to do with difficulty. Gases obey a handful of clean, quantitative laws, which makes them ideal material for one-mark objective questions: a law can be named, a proportionality can be inverted, a number can be substituted. Candidates who treat Unit 6 of the Standard XI Chemistry text as a formula list usually lose marks on the small print — the pressure at which a molar volume applies, the units of R, or whether a given law needs temperature in celsius or kelvin. This lesson works through the whole chain, from the three simple gas laws to real-gas behaviour, keeping the examinable detail in view.
The three simple gas laws, and the trap in each
Robert Boyle established in 1662 that for a fixed amount of gas at constant temperature, volume falls as pressure rises, with the product PV staying constant. The trap is the qualifier: the law is accurate only at low pressure, because it quietly assumes the molecules have no volume of their own. Jacques Charles’s law states that at constant pressure the volume of a gas is directly proportional to its absolute temperature, so V/T stays constant. Here the trap is the temperature scale. A question that gives 27 °C and 127 °C and asks for the ratio of volumes wants 300 K : 400 K, that is 3 : 4 — not 27 : 127. Extrapolating the volume–temperature line backwards gives the point where volume would vanish, −273.15 °C, which is how absolute zero is defined. Gay-Lussac’s law completes the set: at constant volume, pressure is directly proportional to absolute temperature. It explains the pressure cooker, the tyre that bursts after a long drive in May, and the warning against throwing an aerosol can into a fire.
Avogadro’s hypothesis and the ideal gas equation
Amedeo Avogadro proposed in 1811 that equal volumes of all gases, measured at the same temperature and pressure, hold equal numbers of molecules — so volume is proportional to the number of moles, independently of what the gas is. Combining this with Boyle’s and Charles’s laws gives the equation that ties the whole chapter together: PV = nRT. R, the universal gas constant, is worth memorising in both of its common forms, because the units of the question decide which one to use: 0.0821 dm3 atm mol−1 K−1 when pressure is in atmospheres and volume in litres, and 8.314 J K−1 mol−1 in SI units. The equation also yields molar volume. One mole of any gas occupies 22.414 dm3 at 0 °C and 1 atm — the familiar 22.4 litres — but 22.71 dm3 at 0 °C and 1 bar, which is the standard pressure IUPAC now prescribes. Both values appear in the Standard XI text, and a question that specifies bar rather than atmosphere is testing whether the candidate noticed.
The mole concept and the 2019 redefinition
The mole is the chemist’s counting unit, and three statements about it will solve almost every numerical question in this chapter: one mole is the molar mass expressed in grams, it contains 6.022 × 1023 particles, and for a gas at STP it occupies 22.4 dm3. The number itself deserves a note. Until 2019 the mole was defined by reference to 12 grams of carbon-12, and the Avogadro number was a measured quantity carrying experimental uncertainty. The revision of the SI that took effect on 20 May 2019 turned this the other way round: the Avogadro constant was fixed by definition at exactly 6.02214076 × 1023 per mole, and the mole is now defined as that many entities. This is a current-affairs-flavoured fact sitting inside a textbook chapter, which is precisely the kind of overlap TNPSC likes. A related shortcut worth carrying into the hall: vapour density is simply molar mass divided by two, since it is measured against hydrogen.
Mixtures and movement: Dalton’s law and Graham’s law
John Dalton’s law of partial pressures says that in a mixture of gases that do not react, the total pressure is the sum of the pressures each gas would exert if it alone filled the container. Each partial pressure can be recovered from the mole fraction: pi = xi × Ptotal. This is the law behind the correction for water vapour when a gas is collected over water, and behind the composition of diving gas mixtures. Thomas Graham’s law governs how fast gases move through a small opening or through one another: the rate of diffusion or effusion is inversely proportional to the square root of the molar mass, rA/rB = √(MB/MA). The standard examination application is hydrogen against oxygen: √(32/2) = 4, so hydrogen diffuses four times faster. The industrial application worth knowing is isotope separation — gaseous diffusion of uranium hexafluoride exploits the tiny mass difference between the isotopes.
Real gases: where the ideal model breaks
No gas is ideal under all conditions, and the chapter’s second half measures the gap. The compressibility factor Z = PV/nRT is the diagnostic: Z equals exactly 1 for an ideal gas at every temperature and pressure, and equals the ratio of real to ideal volume. Deviations shrink at low pressure and high temperature, where molecules are far apart and fast-moving. The Boyle temperature is the temperature at which a particular real gas follows the ideal equation over an appreciable pressure range; above it Z exceeds 1 throughout, while below it Z first dips to a minimum and then climbs. Johannes van der Waals supplied the correction in 1873: (P + an2/V2)(V − nb) = nRT. The term a adds back the pressure lost to intermolecular attraction, and b subtracts the volume the molecules themselves occupy, with b equal to four times the actual molecular volume. Both constants are characteristic of the gas, and a large a marks a gas that liquefies easily.
Liquefaction, critical constants and Andrews’ isotherms
Thomas Andrews’s experiments on carbon dioxide gave the chapter its most quotable numbers. Plotting pressure against volume at a series of temperatures, he found that below a certain temperature the gas separates into liquid and vapour coexisting at constant pressure, and that this coexistence region shrinks as temperature rises until it disappears entirely at the critical point. The critical temperature Tc is the temperature above which a gas cannot be liquefied by pressure alone, however great; the critical pressure Pc is the minimum pressure needed to liquefy one mole at Tc. For carbon dioxide, Tc = 304.2 K, which is 31.1 °C, and Pc = 72.9 atm. In the textbook table water has the highest critical temperature at 647.4 K and helium the lowest at 5.2 K — a ranking worth remembering, because “which gas is hardest to liquefy” is a standing favourite. Liquefaction in practice relies on the Joule–Thomson effect, the cooling a real gas undergoes when it expands adiabatically through a throttle; Linde’s process uses this effect alone, while Claude’s process makes the gas do mechanical work as well and so cools it further.
TNPSC தேர்வுகளில் வாயு நிலைக்கு இத்தனை முக்கியத்துவம் ஏன்?
பொருளின் மூன்று நிலைகளில், TNPSC பொது அறிவியல் வினாத்தாள் மிக அடிக்கடி திரும்பிவரும் பகுதி வாயு நிலையே. இதற்குக் காரணம் அது கடினமானது என்பதல்ல — வாயுக்கள் சில தெளிவான, அளவிடத்தக்க விதிகளுக்குக் கீழ்ப்படிகின்றன; எனவே ஒரு மதிப்பெண் வினாக்களுக்கு அவை மிகப் பொருத்தமான பொருளாகின்றன. ஒரு விதியின் பெயரைக் கேட்கலாம், ஒரு விகிதத்தை மாற்றிக் கேட்கலாம், ஒரு எண்ணை இட்டுக் கணக்கிடச் சொல்லலாம். பதினோராம் வகுப்பு வேதியியல் அலகு 6-ஐ வெறும் சூத்திரப் பட்டியலாக மட்டும் படிக்கும் போட்டியாளர்கள், பெரும்பாலும் சிறு விவரங்களிலேயே மதிப்பெண் இழக்கிறார்கள் — மோலார் பரும அளவு எந்த அழுத்தத்திற்குப் பொருந்தும், R-இன் அலகுகள் என்ன, அந்த விதிக்கு வெப்பநிலை செல்சியஸிலா கெல்வினிலா என்பது போன்றவை. இந்தப் பாடத்தில் எளிய வாயு விதிகளில் தொடங்கி நிகர வாயுக்களின் நடத்தை வரை, தேர்வுக்குத் தேவையான நுட்பங்களுடன் முழுத் தொடரையும் பார்ப்போம்.
மூன்று எளிய வாயு விதிகள் — ஒவ்வொன்றிலும் ஒரு பொறி
ராபர்ட் பாயில் 1662-இல், மாறா வெப்பநிலையில் ஒரு குறிப்பிட்ட அளவு வாயுவின் அழுத்தம் உயர உயர பரும அளவு குறையும், PV-இன் பெருக்குத்தொகை மாறாமல் இருக்கும் என நிறுவினார். இதில் உள்ள பொறி ஒரு நிபந்தனை: குறைந்த அழுத்தத்தில் மட்டுமே இந்த விதி துல்லியமானது; ஏனெனில் மூலக்கூறுகளுக்குச் சொந்தப் பரும அளவு இல்லை என்ற அனுமானம் இதில் மறைந்துள்ளது. ழாக் சார்லஸின் விதி, மாறா அழுத்தத்தில் வாயுவின் பரும அளவு அதன் தனி வெப்பநிலைக்கு நேர்விகிதத்தில் இருக்கும் என்கிறது; எனவே V/T மாறிலி. இங்கே பொறி வெப்பநிலை அளவுகோல். 27 °C, 127 °C எனத் தந்து பரும அளவுகளின் விகிதம் கேட்கப்பட்டால், விடை 300 K : 400 K அதாவது 3 : 4 — 27 : 127 அல்ல. பரும அளவு–வெப்பநிலை கோட்டைப் பின்னோக்கி நீட்டினால், பரும அளவு சுழியமாகும் புள்ளி −273.15 °C கிடைக்கிறது; தனிச் சுழியம் இவ்வாறே வரையறுக்கப்படுகிறது. கே-லூசாக் விதி இந்தத் தொகுப்பை நிறைவு செய்கிறது: மாறா பரும அளவில் அழுத்தம் தனி வெப்பநிலைக்கு நேர்விகிதத்தில் இருக்கும். குக்கரில் அழுத்தம் ஏறுவது, நெடுந்தூரப் பயணத்திற்குப் பின் கோடையில் டயர் வெடிப்பது, தீயில் ஸ்ப்ரே டின்னை வீசக் கூடாது என்ற எச்சரிக்கை — இவை அனைத்தும் இந்த விதியே.
அவகாட்ரோ கருதுகோளும் இலட்சிய வாயு சமன்பாடும்
அமிடியோ அவகாட்ரோ 1811-இல், ஒரே வெப்பநிலை மற்றும் அழுத்தத்தில் அளக்கப்படும் அனைத்து வாயுக்களின் சம பரும அளவுகளில் சம எண்ணிக்கையிலான மூலக்கூறுகள் இருக்கும் எனக் கூறினார் — அதாவது வாயு எதுவாக இருந்தாலும், பரும அளவு மோல்களின் எண்ணிக்கைக்கு நேர்விகிதத்தில் இருக்கும். இதை பாயில், சார்லஸ் விதிகளுடன் இணைத்தால், இந்த அலகு முழுவதையும் பிணைக்கும் சமன்பாடு கிடைக்கிறது: PV = nRT. பொது வாயு மாறிலி R-ஐ இரண்டு வடிவங்களிலும் மனப்பாடம் செய்வது அவசியம்; வினாவில் தரப்படும் அலகுகளே எதைப் பயன்படுத்த வேண்டும் என்பதைத் தீர்மானிக்கும் — அழுத்தம் atm-இலும் பரும அளவு லிட்டரிலும் இருந்தால் 0.0821 dm3 atm mol−1 K−1; SI அலகுகளில் 8.314 J K−1 mol−1. இதே சமன்பாடு மோலார் பரும அளவையும் தருகிறது. எந்த வாயுவின் ஒரு மோலும் 0 °C, 1 atm-இல் 22.414 dm3 — நமக்குப் பழகிய 22.4 லிட்டர் — ஆனால் 0 °C, 1 bar-இல் 22.71 dm3; தற்போது IUPAC பரிந்துரைக்கும் நியம அழுத்தம் 1 bar என்பதே. இரு மதிப்புகளும் பதினோராம் வகுப்பு நூலில் உள்ளன; atm-க்குப் பதிலாக bar எனக் குறிப்பிடும் வினா, போட்டியாளர் அதைக் கவனித்தாரா என்பதையே சோதிக்கிறது.
மோல் கருத்தும் 2019 மறுவரையறையும்
மோல் என்பது வேதியியலாளரின் எண்ணும் அலகு. அதைப் பற்றிய மூன்று கூற்றுகள் இந்த அலகின் கணக்குகள் அனைத்தையும் தீர்த்துவிடும்: ஒரு மோல் என்பது கிராமில் வெளிப்படுத்தப்பட்ட மோலார் நிறை; அதில் 6.022 × 1023 துகள்கள் உள்ளன; STP-இல் ஒரு வாயுவுக்கு அது 22.4 dm3 இடம் பெறும். இந்த எண்ணைப் பற்றி ஒரு குறிப்பு அவசியம். 2019 வரை மோல் என்பது கார்பன்-12-இன் 12 கிராமைக் கொண்டு வரையறுக்கப்பட்டது; அவகாட்ரோ எண் என்பது பரிசோதனைப் பிழை கொண்ட அளவிடப்பட்ட மதிப்பாக இருந்தது. 2019 மே 20-இல் நடைமுறைக்கு வந்த SI மறுவரையறை இதை நேர்மாறாக்கியது: அவகாட்ரோ மாறிலி ஒரு மோலுக்கு சரியாக 6.02214076 × 1023 என வரையறையாலேயே நிர்ணயிக்கப்பட்டது; மோல் என்பது அந்த எண்ணிக்கையிலான துகள்கள் என இப்போது வரையறுக்கப்படுகிறது. பாடநூல் பாடத்தினுள் அமர்ந்திருக்கும் நடப்பு நிகழ்வுத் தன்மை கொண்ட தகவல் இது; இத்தகைய இணைப்புகளே TNPSC-க்குப் பிரியமானவை. தேர்வுக் கூடத்திற்கு எடுத்துச் செல்லத்தக்க இன்னொரு குறுக்குவழி: ஆவி அடர்த்தி என்பது மோலார் நிறையை இரண்டால் வகுத்த மதிப்பு; ஏனெனில் அது ஹைட்ரஜனை ஒப்பிட்டே அளக்கப்படுகிறது.
கலவைகளும் நகர்வும்: டால்டன் விதியும் கிரஹாம் விதியும்
ஜான் டால்டனின் பகுதி அழுத்த விதி, வினைபுரியாத வாயுக் கலவையில் மொத்த அழுத்தம் என்பது ஒவ்வொரு வாயுவும் தனியாகக் கொள்கலனை நிரப்பியிருந்தால் ஏற்படுத்தும் அழுத்தங்களின் கூட்டுத்தொகை என்கிறது. ஒவ்வொரு பகுதி அழுத்தத்தையும் மோல் பின்னத்திலிருந்து பெறலாம்: pi = xi × Ptotal. நீரின் மேல் வாயுவைச் சேகரிக்கும்போது நீராவிக்கான திருத்தம், மூழ்காண்டிகளின் வாயுக் கலவை அமைப்பு — இவற்றுக்குப் பின்னால் இருப்பது இந்த விதியே. தாமஸ் கிரஹாமின் விதி, வாயுக்கள் சிறு துளை வழியாகவோ ஒன்றுக்குள் ஒன்றாகவோ எவ்வளவு வேகமாக நகரும் என்பதை ஆள்கிறது: பரவல் அல்லது வெளியேற்ற வீதம் மோலார் நிறையின் வர்க்கமூலத்திற்கு எதிர்விகிதத்தில் இருக்கும் — rA/rB = √(MB/MA). தேர்வுகளில் வழக்கமான பயன்பாடு ஹைட்ரஜன்–ஆக்சிஜன் ஒப்பீடு: √(32/2) = 4; எனவே ஹைட்ரஜன் நான்கு மடங்கு வேகமாகப் பரவும். தொழில்துறைப் பயன்பாடாக அறிந்திருக்க வேண்டியது சமதானிப் பிரிப்பு — யூரேனியம் ஹெக்சாஃபுளூரைடின் வாயுப் பரவல் முறை, சமதானிகளுக்கு இடையேயான மிகச் சிறிய நிறை வேறுபாட்டையே பயன்படுத்துகிறது.
நிகர வாயுக்கள்: இலட்சிய மாதிரி தோல்வியடையும் இடம்
எந்த வாயுவும் எல்லா நிலைகளிலும் இலட்சியமானது அல்ல; இந்த அலகின் பின் பாதி அந்த இடைவெளியை அளக்கிறது. அடக்கத்திறன் காரணி Z = PV/nRT என்பதே அதற்கான கருவி: இலட்சிய வாயுவுக்கு எல்லா வெப்பநிலை, அழுத்தத்திலும் Z சரியாக 1; மேலும் Z என்பது நிகர பரும அளவுக்கும் இலட்சிய பரும அளவுக்கும் இடையேயான விகிதம். குறைந்த அழுத்தம், அதிக வெப்பநிலை நிலைகளில் விலகல்கள் குறைகின்றன; அங்கே மூலக்கூறுகள் வெகு தொலைவில், வேகமாக இயங்குகின்றன. பாயில் வெப்பநிலை என்பது ஒரு குறிப்பிட்ட நிகர வாயு கணிசமான அழுத்த வரம்பில் இலட்சிய சமன்பாட்டைப் பின்பற்றும் வெப்பநிலை; அதற்கு மேல் Z முழுவதும் 1-ஐ விட அதிகம், அதற்குக் கீழ் Z முதலில் குறைந்து குறைந்தபட்ச மதிப்பை அடைந்து பின் உயரும். யொகானஸ் வான்டர்வால்ஸ் 1873-இல் திருத்தத்தை அளித்தார்: (P + an2/V2)(V − nb) = nRT. இதில் a என்ற தொகுதி, மூலக்கூறு இடைக் கவர்ச்சியால் இழந்த அழுத்தத்தைத் திரும்பச் சேர்க்கிறது; b என்ற தொகுதி, மூலக்கூறுகளே ஆக்கிரமிக்கும் பரும அளவைக் கழிக்கிறது — b என்பது உண்மையான மூலக்கூறுப் பரும அளவின் நான்கு மடங்கு. இரு மாறிலிகளும் அந்த வாயுவுக்கே உரியவை; a மதிப்பு பெரிதாக இருந்தால் அந்த வாயு எளிதில் திரவமாகும்.
திரவமாக்கல், தனி மாறிலிகள் மற்றும் ஆண்ட்ரூஸ் சமவெப்பக் கோடுகள்
கார்பன் டை ஆக்சைடு மீது தாமஸ் ஆண்ட்ரூஸ் நடத்திய பரிசோதனைகளே இந்த அலகின் மிக முக்கியமான எண்களைத் தந்தன. பல வெப்பநிலைகளில் அழுத்தத்திற்கு எதிராகப் பரும அளவை வரைந்தபோது, ஒரு குறிப்பிட்ட வெப்பநிலைக்குக் கீழே வாயு மாறா அழுத்தத்தில் திரவமாகவும் ஆவியாகவும் பிரிந்து சேர்ந்து இருப்பதையும், வெப்பநிலை உயர உயர இந்த இணை–இருப்புப் பகுதி சுருங்கி, தனிப் புள்ளியில் முற்றிலும் மறைவதையும் அவர் கண்டார். தனி வெப்பநிலை Tc என்பது, எவ்வளவு அழுத்தம் கொடுத்தாலும் அழுத்தத்தால் மட்டுமே வாயுவைத் திரவமாக்க முடியாத வெப்பநிலைக்கு மேற்பட்ட நிலை; தனி அழுத்தம் Pc என்பது Tc-இல் ஒரு மோலைத் திரவமாக்கத் தேவையான குறைந்தபட்ச அழுத்தம். கார்பன் டை ஆக்சைடுக்கு Tc = 304.2 K அதாவது 31.1 °C; Pc = 72.9 atm. பாடநூல் அட்டவணையில் நீருக்கு மிக உயர்ந்த தனி வெப்பநிலை 647.4 K; ஹீலியத்திற்கு மிகக் குறைந்தது 5.2 K — “எந்த வாயுவைத் திரவமாக்குவது மிகக் கடினம்” என்ற வினா தொடர்ந்து கேட்கப்படுவதால், இந்த வரிசையை நினைவில் வைப்பது நல்லது. நடைமுறையில் திரவமாக்கல் சூல்–தாம்சன் விளைவை நம்பியுள்ளது — ஒரு நிகர வாயு அடைப்பான் வழியாக வெப்பம் புகா முறையில் விரிவடையும்போது ஏற்படும் குளிர்வு அது. லிண்டே முறை இந்த விளைவை மட்டுமே பயன்படுத்துகிறது; கிலாட் முறையில் வாயுவை இயந்திர வேலையும் செய்ய வைத்து மேலும் குளிரச் செய்கிறார்கள்.
Questions in these patterns have repeatedly appeared in TNPSC Group 2, 2A, 4 and VAO General Science papers, and in the Standard XI Chemistry evaluation exercises. இத்தகைய வினாக்கள் TNPSC குரூப் 2, 2A, 4 மற்றும் VAO பொது அறிவியல் வினாத்தாள்களில் தொடர்ந்து கேட்கப்பட்டுள்ளன.
குரூப் 1, 2, 2A, 4 மற்றும் VAO தேர்வுகளுக்கான தினசரி இருமொழிக் குறிப்புகள், நடப்பு நிகழ்வுகள் மற்றும் தேர்வுத் தொகுப்புகள்.
Doubt in this topic? / சந்தேகமா? Ask us on WhatsApp →
