TNPSC Daily Notes: Industries & Industrial Regions of India — Iron & Steel, Cotton Textiles, Industrial Corridors & Tamil Nadu Clusters | இந்தியத் தொழில்களும் தொழில் பகுதிகளும் — 18 November 2026

20 min read

ATHIYAMAN ACADEMY brings you today’s TNPSC Daily Notes on Industries and Industrial Regions of India — a complete bilingual study guide covering the iron and steel industry, SAIL plants and their foreign collaborations, cotton textiles, jute and sugar, the eight major industrial regions, the National Industrial Corridor Development Programme and the industrial clusters of Tamil Nadu. These notes are prepared for aspirants of TNPSC Group 1, 2, 2A, 4 and VAO examinations, with 15 key points, detailed notes in English and Tamil, 5 practice MCQs, memory tips and previous year questions. அதியமான் அகாடமி வழங்கும் இன்றைய தேர்வுக் குறிப்பு: இந்தியத் தொழில்களும் தொழில் பகுதிகளும் — இரும்பு-எஃகு, பருத்தி ஜவுளி, தொழில் வழித்தடங்கள் மற்றும் தமிழ்நாட்டுத் தொழில் கூட்டங்கள் — குரூப் 1, 2, 2A, 4 மற்றும் VAO தேர்வுகளுக்கான முழுமையான குறிப்புகள்.

🏭 Industries & Industrial Regions of India
இந்தியத் தொழில்களும் தொழில் பகுதிகளும்
18 November 2026

🎯 Key Points | முக்கியக் குறிப்புகள்
1India has 8 major industrial regions, 13 minor industrial regions and a number of industrial districts, classified on the basis of concentration of manufacturing units.
இந்தியாவில் 8 பெரும் தொழில் பகுதிகள், 13 சிறு தொழில் பகுதிகள் மற்றும் பல தொழில் மாவட்டங்கள் உள்ளன.
2The first modern cotton textile mill was set up in Mumbai in 1854; the first jute mill at Rishra, Hooghly (West Bengal) in 1855.
முதல் நவீன பருத்தி ஜவுளி ஆலை 1854-இல் மும்பையிலும், முதல் சணல் ஆலை 1855-இல் மேற்கு வங்காளத்தின் ரிஷ்ராவிலும் தொடங்கப்பட்டன.
3TISCO was founded by Jamsetji Tata at Sakchi (later Jamshedpur) in 1907 and began production in 1912 — India’s first large private steel plant.
TISCO நிறுவனம் ஜம்ஷெட்ஜி தாதா அவர்களால் 1907-இல் சாக்சியில் (பின்னர் ஜம்ஷெட்பூர்) தொடங்கப்பட்டது; 1912-இல் உற்பத்தி தொடங்கியது.
4SAIL runs five integrated steel plants: Bhilai (USSR collaboration), Rourkela (West Germany), Durgapur (Britain), Bokaro (USSR) and IISCO-Burnpur.
SAIL நிறுவனத்தின் ஐந்து ஒருங்கிணைந்த எஃகு ஆலைகள்: பிலாய் (சோவியத் ஒத்துழைப்பு), ரவர்கேலா (மேற்கு ஜெர்மனி), துர்காபூர் (பிரிட்டன்), பொகாரோ (சோவியத்) மற்றும் IISCO-பர்ன்பூர்.
5Visakhapatnam Steel Plant (RINL) in Andhra Pradesh is India’s only shore-based integrated steel plant.
ஆந்திராவில் உள்ள விசாகப்பட்டிணம் எஃகு தொழிற்சாலை (RINL) தான் இந்தியாவின் ஒரே கடற்கரை அருகில் அமைந்த ஒருங்கிணைந்த எஃகு ஆலை.
6Of SAIL’s three special steel plants, the Salem Steel Plant in Tamil Nadu produces stainless steel.
SAIL-இன் மூன்று சிறப்பு எஃகு ஆலைகளில் தமிழ்நாட்டிலுள்ள சேலம் எஃகு ஆலை துருப்பிடிக்காத எஃகு உற்பத்தி செய்கிறது.
7The National Industrial Corridor Development Programme (NICDP) covers 11 industrial corridors, implemented by NICDC under DPIIT.
தேசிய தொழில் வழித்தட மேம்பாட்டுத் திட்டம் (NICDP) ஆனது 11 தொழில் வழித்தடங்களை கொண்டது; NICDC இதை செயல்படுத்துகிறது.
8In August 2024 the Union Cabinet approved 12 greenfield industrial smart cities across 10 states at a cost of Rs 28,602 crore.
ஆகஸ்ட் 2024-இல் மத்திய அமைச்சரவை 10 மாநிலங்களில் 12 புதிய தொழில் சிட்டி நகரங்களை ரூ.28,602 கோடியில் அங்கீகரித்தது.
9Two NICDP corridors touch Tamil Nadu: the Chennai–Bengaluru Industrial Corridor (CBIC) and its extension to Kochi via Coimbatore (ECKC).
NICDP-இன் இரண்டு வழித்தடங்கள் தமிழ்நாட்டைச் சேர்கின்றன: சென்னை–பெங்களூரு தொழில் வழித்தடம் (CBIC) மற்றும் கொயம்பத்தூர் வழியாக கொச்சி வரை நீட்டிப்பு (ECKC).
10Coimbatore is called the Manchester of South India; Tiruppur is the knitwear and hosiery capital and Karur leads in home textiles.
கோயம்பத்தூர் தென்னிந்திய மாஞ்சஸ்டர் எனப்படுகிறது; திருப்பூர் பனியன் தலைநகரம்; கரூர் வீட்டுப் பயன்பாட்டு ஜவுளியில் முன்னணி.
11Sivakasi dominates fireworks, safety matches and offset printing — the Kutty Japan of Tamil Nadu.
சிவகாசி பட்டாசு, தீப்பெட்டி மற்றும் அச்சுத் தொழில்களின் தலைநகரம் — குட்டி ஜப்பான்.
12Chennai is the Detroit of India for automobiles, with Hosur as a major auto, electronics and two-wheeler hub.
வாகனத் தொழிலின் காரணமாக சென்னை இந்தியாவின் டிட்ராயிட் எனப்படுகிறது; ஓசூர் வாகன மற்றும் மின்னணுவியல் மையம்.
13The Integral Coach Factory (ICF), Perambur, Chennai is the world’s largest rail coach manufacturer by volume.
சென்னை பெரம்பூர் ஒருங்கிணைந்த பெட்டி தொழிற்சாலை (ICF) உலகின் மிகப்பெரிய இரயில் பெட்டி தயாரிப்பு நிலையம்.
14Neyveli (NLC India) in Cuddalore district is built on lignite — brown coal used for thermal power.
கடலூர் மாவட்டத்தில் உள்ள நெய்வேலி (NLC India) பழுப்பு நிலக்கரி அடிப்படையில் இயங்குகிறது.
15Alfred Weber’s least-cost theory of industrial location holds that industry settles where transport, labour and agglomeration costs are lowest.
ஆல்ப்ரெட் வெபரின் குறைந்த செலவுக் கோட்பாட்டின்படி, போக்குவரத்து, உழைப்பு மற்றும் கூட்டமைவுச் செலவு குறைவான இடத்தில் தொழில் அமைகிறது.

📖 Detailed Notes — English

1. What counts as an industry, and how we classify it

Manufacturing is the act of turning raw material into a product of higher value. Geography studies industry not as a list of factories but as a pattern on the map — why a jute mill sits on the Hooghly and an aluminium smelter sits next to a power station. For TNPSC, the classification itself is a reliable source of one-mark questions.

By raw material, industries are agro-based (cotton, sugar, jute, edible oil), mineral-based (iron and steel, cement, aluminium), forest-based (paper, lac, plywood) and marine-based (fish processing, sea-food packing). By size and investment they are cottage, small-scale, medium and large-scale. By ownership they are public sector (SAIL, BHEL, NLC), private sector (TISCO, Reliance), joint sector and cooperative sector — Amul in dairy and IFFCO in fertilisers are the standard cooperative examples. By role in the economy they divide into basic or key industries, whose output feeds other industries (iron and steel, aluminium), and consumer industries, whose output reaches the household directly (sugar, paper, toothpaste).

A fifth useful split is by weight of raw material. Industries that lose weight during processing — sugar from cane, iron from ore — locate near the raw material. Industries that gain weight or bulk, or whose product is fragile and costly to move, locate near the market. Alfred Weber’s least-cost theory formalises this: a plant settles at the point where transport cost, labour cost and the savings from agglomeration together reach a minimum.

2. The iron and steel industry

Steel is the index of industrial strength, and its geography in India is dictated by the Chotanagpur plateau, where iron ore, coking coal, manganese, limestone and dolomite lie within a short haul of one another. TISCO, founded by Jamsetji Tata at Sakchi in 1907, began production in 1912 and became the first large private steel works in Asia. Sakchi was renamed Jamshedpur in his honour.

After Independence, steel became a public-sector mission financed and engineered with foreign help. Rourkela in Odisha was built with West German collaboration, Bhilai in Chhattisgarh and Bokaro in Jharkhand with Soviet collaboration, and Durgapur in West Bengal with British collaboration. These four, together with the older IISCO plant at Burnpur near Asansol, make up the integrated plants of the Steel Authority of India Limited (SAIL), formed in 1973. SAIL also runs three special steel plants: the Alloy Steel Plant at Durgapur, which supplies the ordnance factories; the Salem Steel Plant in Tamil Nadu, India’s stainless steel specialist; and Visvesvaraya Iron and Steel Ltd at Bhadravathi, Karnataka, which uses charcoal rather than coke.

Standing apart is the Visakhapatnam Steel Plant of Rashtriya Ispat Nigam Ltd — the only shore-based integrated plant in the country, built so that imported coking coal can be landed directly at the works. India is today the world’s second-largest crude steel producer after China.

3. Cotton textiles, jute and sugar

The cotton textile industry is India’s oldest organised industry and its largest employer after agriculture. The first modern mill opened in Mumbai in 1854, and Mumbai earned the name Cosmopolis of India and, for a century, Cottonopolis. The industry clustered in Maharashtra and Gujarat because the black regolith soil of the Deccan grew long-staple cotton, the humid coastal air kept yarn from snapping, Mumbai port handled machinery and exports, and mill finance came from the city’s trading houses. Ahmedabad, the second centre, is the Manchester of India. The industry has since decentralised sharply towards Tamil Nadu, which now has the largest number of mills in the country.

The jute industry is the mirror image — tightly concentrated along a narrow belt of the Hooghly in West Bengal. The first mill came up at Rishra in 1855. Partition in 1947 handed roughly three-quarters of the jute-growing land to East Pakistan while leaving almost all the mills in India, a dislocation the industry took decades to absorb.

The sugar industry is the classic weight-losing, raw-material-oriented industry: cane loses sucrose within 24 hours of cutting, so mills must sit in the cane fields. Uttar Pradesh leads in the number of mills while Maharashtra, with its cooperative mills and higher-sucrose cane, usually leads in output. The industry has been shifting steadily southwards towards Maharashtra, Karnataka and Tamil Nadu, where the crushing season is longer.

4. The eight major industrial regions

Geographers group India’s manufacturing into eight major industrial regions, thirteen minor regions and a scatter of industrial districts. The eight are: Mumbai–Pune; Kolkata–Hooghly; Ahmedabad–Vadodara; Madurai–Coimbatore–Bengaluru; Chotanagpur; Agra–Delhi–Kalka–Saharanpur; Visakhapatnam–Guntur; and Kollam–Thiruvananthapuram.

Each has a distinct logic. Mumbai–Pune grew on cotton, port trade and hydel power from the Western Ghats, and has diversified into engineering, petrochemicals, film and finance. Kolkata–Hooghly rests on jute, tea, coal from the Damodar valley and the river itself as a highway. Chotanagpur is the mineral heartland: Jamshedpur, Bokaro, Durgapur and Asansol sit on the iron-and-coal pairing. The southern region — Madurai, Coimbatore and Bengaluru — is unusual in that it grew with no local coal, running instead on hydro-electricity from the Cauvery and the Ghats, which is why it specialised in cotton textiles and later in light engineering, electronics and software.

5. Industrial corridors and the 2024 smart cities

The National Industrial Corridor Development Programme (NICDP) is the present framework for planned industrialisation, implemented by the National Industrial Corridor Development Corporation (NICDC) under DPIIT, Ministry of Commerce and Industry. It covers eleven corridors: Delhi–Mumbai, Chennai–Bengaluru, Amritsar–Kolkata, Vizag–Chennai, Bengaluru–Mumbai, the extension of CBIC to Kochi via Coimbatore, Hyderabad–Nagpur, Hyderabad–Warangal, Hyderabad–Bengaluru, the Odisha Economic Corridor and Delhi–Nagpur.

In August 2024 the Union Cabinet cleared twelve greenfield industrial smart cities under this programme, spread over ten states at a total cost of Rs 28,602 crore: Khurpia in Uttarakhand, Rajpura-Patiala in Punjab, Hisar in Haryana, Agra and Prayagraj in Uttar Pradesh, Gaya in Bihar, Dighi Port Industrial Area in Maharashtra, Jodhpur-Pali-Marwar in Rajasthan, Kopparthy and Orvakal in Andhra Pradesh, Zaheerabad in Telangana and Palakkad in Kerala.

6. Industrial Tamil Nadu

Tamil Nadu is among the most industrialised and most urbanised states in India, and its industry is notably decentralised — spread across district towns rather than piled into one metropolis. Coimbatore, the Manchester of South India, combines cotton mills with pumpsets, motors and foundries. Tiruppur is the knitwear and hosiery capital and a major export earner; Karur leads in home textiles and Erode in handlooms and powerlooms. Sivakasi, nicknamed Kutty Japan, concentrates fireworks, safety matches and offset printing.

Chennai, the Detroit of India, anchors automobile manufacture, with Hosur in Krishnagiri district as a second hub for two-wheelers, auto components and electronics. The Integral Coach Factory at Perambur is the world’s largest rail coach builder by volume. Salem has the stainless steel plant, Neyveli in Cuddalore district runs on lignite under NLC India, Ranipet and Vellore form the leather and tanning belt, Thoothukudi combines a major port with salt pans and chemicals, and Dindigul is known for locks and tanning. The state’s industrial estates are developed largely by SIPCOT and TIDCO.

📖 விரிவான குறிப்புகள் — தமிழ்

1. தொழில் என்றால் என்ன, அதை எவ்வாறு வகைப்படுத்துவது

மூலப் பொருளை அதிக மதிப்புள்ள பொருளாக மாற்றுவதே உற்பத்தி. நிலவியல் தொழில்களை ஒரு பட்டியலாக அல்லாமல், வரைபடத்தில் ஒரு அமைவாக படிக்கிறோம் — சணல் ஆலை ஏன் உகலி ஆற்றங்கரையில் அமைந்தது, அலுமினிய உருக்காலை ஏன் மின் நிலையத்தின் அருகில் அமைந்தது என்பதை. தேர்வுகளில் வகைப்பாடு எந்த ஆண்டிலும் வினாவாக வருகிறது.

மூலப் பொருள் அடிப்படையில் தொழில்கள் விவசாய அடிப்படை (பருத்தி, சர்க்கரை, சணல்), கனிம அடிப்படை (இரும்பு-எஃகு, சிமென்ட், அல்லூமினியம்), வன அடிப்படை (காகிதம், ப்ளைவுட்) மற்றும் கடல்சார் அடிப்படை எனப் பிரிக்கப்படுகின்றன. அளவு மற்றும் முதலீட்டின் அடிப்படையில் குடிசைத் தொழில், சிறுத்தொழில், பெருந்தொழில் எனவும், உடைமை அடிப்படையில் பொதுத்துறை, தனியார்த்துறை, கூட்டுறவுத்துறை எனவும் பிரிக்கப்படுகின்றன. அமுல் மற்றும் IFFCO கூட்டுறவுத் தொழில்களின் எடுத்துக்காட்டுகள்.

சர்க்கரை, இரும்புப் போன்ற எடை இழக்கும் தொழில்கள் மூலப் பொருளின் அருகிலேயும், எடை கூடும் அல்லது உடையக்கூடிய தொழில்கள் சந்தையின் அருகிலேயும் அமைகின்றன. ஆல்ப்ரெட் வெபர் இதையே குறைந்த செலவுக் கோட்பாடாக வகுத்தார்.

2. இரும்பு மற்றும் எஃகுத் தொழில்

ஒரு நாட்டின் தொழில் வலிமைக்கு எஃகு உற்பத்தியே அளவுகோல். இந்தியாவில் இத்தொழில் சோட்டா நாக்பூர் பீடபூமியை மையமாகக் கொண்டது; இரும்புத் தாது, கோக் நிலக்கரி, மாங்கனீசு, சுண்ணாம்புக் கல் அனைத்தும் அருகருகில் கிடைக்கின்றன. 1907-இல் ஜம்ஷெட்ஜி தாதா சாக்சியில் தொடங்கிய TISCO 1912-இல் உற்பத்தியைத் தொடங்கியது; சாக்சி பின்னர் ஜம்ஷெட்பூர் எனப் பெயர் மாற்றப்பட்டது.

சுதந்திரத்திற்குப் பிறகு எஃகு ஆலைகள் அயல்நாட்டு ஒத்துழைப்புடன் அரசுத் துறையில் கட்டப்பட்டன: ஒடிசாவில் ரவர்கேலா (மேற்கு ஜெர்மனி), சத்தீஸ்கரில் பிலாய் மற்றும் ஜார்க்கண்டில் பொகாரோ (சோவியத்), மேற்கு வங்காளத்தில் துர்காபூர் (பிரிட்டன்). இவை நான்குடன் பர்ன்பூரில் உள்ள IISCO ஆலையும் சேர்ந்து 1973-இல் உருவான SAIL நிறுவனத்தின் ஒருங்கிணைந்த ஆலைகள் ஆகும்.

SAIL-இன் சிறப்பு எஃகு ஆலைகள் மூன்று: துர்காபூர் உலோகக் கலவை ஆலை, தமிழ்நாட்டில் சேலம் எஃகு ஆலை (துருப்பிடிக்காத எஃகு), கர்நாடகாவில் பத்ராவதி VISL. ஆந்திராவில் உள்ள விசாகப்பட்டிணம் எஃகு தொழிற்சாலை (RINL) இந்தியாவின் ஒரே கடற்கரை அருகில் அமைந்த ஆலை. உலகில் சீனாவுக்கு அடுத்தபடியாக இரண்டாவது பெரிய எஃகு உற்பத்தி நாடாக இந்தியா உள்ளது.

3. பருத்தி ஜவுளி, சணல் மற்றும் சர்க்கரை

பருத்தி ஜவுளித் தொழில் தான் இந்தியாவின் மிகப் பழைய ஒழுங்குபடுத்தப்பட்ட தொழில்; விவசாயத்திற்கு அடுத்தபடியாக அதிக வேலைவாய்ப்பை வழங்குகிறது. முதல் நவீன ஆலை 1854-இல் மும்பையில் தொடங்கப்பட்டது. தக்காணத்தின் கரிசல் மண், சீரான காற்று, மும்பைத் துறைமுகம், வர்த்தக மூலதனம் ஆகியன இணைந்ததால் மகாராஷ்டிரா-குஜராத்தில் தொழில் குவிந்தது. அகமதாபாத் இந்தியாவின் மாஞ்சஸ்டர் எனப்படுகிறது. இன்று அதிக ஆலைகளைக் கொண்ட மாநிலம் தமிழ்நாடு.

சணல் தொழில் மேற்கு வங்காளத்தின் உகலி ஆற்றங்கரையில் மட்டுமே குவிந்துள்ளது; முதல் ஆலை 1855-இல் ரிஷ்ராவில். 1947 பிரிவினையில் சணல் விளையும் நிலம் கிழக்கு பாகிஸ்தானுக்கும், ஆலைகள் இந்தியாவுக்கும் பிரிந்தது ஒரு பெரும் நெருக்கடியாக அமைந்தது.

சர்க்கரைத் தொழில் மூலப் பொருள் சார்ந்தது; கரும்பு வெட்டப்பட்ட 24 மணி நேரத்தில் சர்க்கரைச் சத்து குறைவதால் ஆலைகள் வயல்களின் அருகிலேயே அமைகின்றன. ஆலைகளின் எண்ணிக்கையில் உத்தரப்பிரதேசம் முன்னணி; உற்பத்தியில் பொதுவாக மகாராஷ்டிரா. தொழில் தெற்கே நகர்வதற்கான காரணம், தென்னிந்தியாவில் அரவைக் காலம் நீண்டது.

4. எட்டு பெரும் தொழில் பகுதிகள்

இந்தியாவின் உற்பத்தித் தொழில்கள் 8 பெரும் தொழில் பகுதிகள், 13 சிறு பகுதிகள் எனப் பிரிக்கப்படுகின்றன. அவை: மும்பை–புணே, கோல்கத்தா–உகலி, அகமதாபாத்–வடோதரா, மதுரை–கோயம்பத்தூர்–பெங்களூரு, சோட்டா நாக்பூர், ஆக்ரா–டெல்லி–கால்கா–சாரன்பூர், விசாகப்பட்டிணம்–குண்டூர், கொல்லம்–திருவனந்தபுரம்.

ஒவ்வொன்றுக்கும் தனித்தனி காரணம் உண்டு. மும்பை–புணே பருத்தி, துறைமுக வர்த்தகம், நீர்மின்சாரம் ஆகியவற்றின் மீது வளர்ந்தது. சோட்டா நாக்பூர் கனிம இதயம் — ஜம்ஷெட்பூர், பொகாரோ, துர்காபூர், அசன்சோல். தென்னகப் பகுதியின் சிறப்பு, அங்கு நிலக்கரி இல்லாமலே காவிரி மற்றும் மலைத்தொடர் நீர்மின்சாரத்தால் வளர்ந்தது தான்; அதனால்தான் ஜவுளி, லேசான பொறியியல், மின்னணுவியல் மற்றும் மென்பொருள் தொழில்கள் சிறப்புற்றன.

5. தொழில் வழித்தடங்களும் 2024 சிட்டி நகரங்களும்

தேசிய தொழில் வழித்தட மேம்பாட்டுத் திட்டம் (NICDP) இன்றைய திட்டமிடப்பட்ட தொழிலமயமாக்கலின் கட்டமைப்பு. DPIIT-இன் கீழ் உள்ள NICDC இதைச் செயல்படுத்துகிறது. இதில் 11 வழித்தடங்கள் உள்ளன: டெல்லி–மும்பை, சென்னை–பெங்களூரு, அமிர்த்சரஸ்–கோல்கத்தா, விசாக்–சென்னை, பெங்களூரு–மும்பை, கோயம்பத்தூர் வழியாக கொச்சி நீட்டிப்பு, ஹைதராபாத்–நாக்பூர், ஹைதராபாத்–வரங்கல், ஹைதராபாத்–பெங்களூரு, ஒடிசா பொருளாதார வழித்தடம், டெல்லி–நாக்பூர்.

ஆகஸ்ட் 2024-இல் மத்திய அமைச்சரவை, 10 மாநிலங்களில் 12 புதிய தொழில் சிட்டி நகரங்களை ரூ.28,602 கோடி மதிப்பில் அங்கீகரித்தது: உத்தரகாண்டில் குர்பியா, பஞ்சாபில் ராஜ்புரா-படியாலா, ஹரியாணாவில் ஹிசார், உத்தரப்பிரதேசத்தில் ஆக்ரா மற்றும் பிரயாக்ராஜ், பீகாரில் கயா, மகாராஷ்டிராவில் திகி துறைமுகப் பகுதி, ராஜஸ்தானில் ஜோத்பூர்-பாலி-மார்வார், ஆந்திராவில் கொப்பர்த்தி மற்றும் ஓர்வகல், தெலங்காணாவில் ஜாகிராபாத், கேரளத்தில் பாலக்காடு.

6. தமிழ்நாட்டின் தொழில் அமைப்பு

தமிழ்நாடு இந்தியாவில் மிகுந்த தொழில்மயமான, நகர்மயமான மாநிலங்களில் ஒன்று; அதன் தொழில்கள் ஒரே மாநகரில் குவியாமல் மாவட்ட நகரங்களில் பரவலாக அமைந்துள்ளன. கோயம்பத்தூர் — தென்னிந்திய மாஞ்சஸ்டர் — ஜவுளி ஆலைகளையும் மோட்டார், பம்ப்செட் தயாரிப்பையும் கொண்டது. திருப்பூர் பனியன் ஏற்றுமதியின் தலைநகரம்; கரூர் வீட்டுப் பயன்பாட்டு ஜவுளி; ஈரோடு கைத்தறி மற்றும் மின்தறி. சிவகாசி — குட்டி ஜப்பான் — பட்டாசு, தீப்பெட்டி, அச்சுத் தொழில்களில் முதன்மை.

சென்னை இந்தியாவின் டிட்ராயிட் என வாகனத் தொழிலின் மையமாகவும், கிருஷ்ணகிரி மாவட்ட ஓசூர் இரண்டாம் மையமாகவும் உள்ளன. பெரம்பூர் ICF உலகின் மிகப்பெரிய இரயில் பெட்டித் தொழிற்சாலை. சேலம் எஃகு, நெய்வேலி பழுப்பு நிலக்கரி (NLC), ராணிப்பேட்டை-வேலூர் தோல் பதனிடும் பகுதி, தூத்துக்குடி துறைமுகம்-உப்பளம்-ரசாயனங்கள், திண்டுக்கல் பூட்டுத் தொழில். மாநிலத்தின் தொழில் பூங்காக்களை முக்கியமாக SIPCOT மற்றும் TIDCO உருவாக்குகின்றன.

❓ 5 Practice MCQs | பயிற்சி வினாக்கள்
Q1. The Visakhapatnam Steel Plant is unique in India because it is the only —
விசாகப்பட்டிணம் எஃகு தொழிற்சாலை தனிச்சிறப்பு வாய்ந்தது ஏனெனில் அது ஒரே —
(A) plant run entirely on imported ore / இறக்குமதி தாதுவில் இயங்கும் ஆலை
(B) shore-based integrated steel plant / கடற்கரை அருகில் அமைந்த ஒருங்கிணைந்த எஃகு ஆலை
(C) plant using charcoal as fuel / கரியைச் சார்ந்த ஆலை
(D) plant in the private sector / தனியார் துறை ஆலை
Q2. Match the steel plant with the country that collaborated in building it. Bhilai & Bokaro were built with the help of —
பிலாய் மற்றும் பொகாரோ எஃகு ஆலைகள் எந்நாட்டின் ஒத்துழைப்புடன் கட்டப்பட்டன?
(A) Britain / பிரிட்டன்
(B) West Germany / மேற்கு ஜெர்மனி
(C) The Soviet Union / சோவியத் ஒன்றியம்
(D) Japan / ஜப்பான்
Q3. How many industrial corridors are covered under the National Industrial Corridor Development Programme?
தேசிய தொழில் வழித்தட மேம்பாட்டுத் திட்டத்தின் கீழ் எத்தனை வழித்தடங்கள் உள்ளன?
(A) Eight / எட்டு
(B) Nine / ஒன்பது
(C) Eleven / பதினொன்று
(D) Fifteen / பதினைந்து
Q4. Which of the following is NOT one of the eight major industrial regions of India?
பின்வருவனவற்றுள் எது இந்தியாவின் எட்டு பெரும் தொழில் பகுதிகளில் ஒன்றல்ல?
(A) Chotanagpur region / சோட்டா நாக்பூர் பகுதி
(B) Jaipur–Ajmer region / ஜைப்பூர்–அஜ்மேர் பகுதி
(C) Kollam–Thiruvananthapuram region / கொல்லம்–திருவனந்தபுரம் பகுதி
(D) Visakhapatnam–Guntur region / விசாகப்பட்டிணம்–குண்டூர் பகுதி
Q5. Sivakasi in Tamil Nadu is famous for fireworks, safety matches and printing. It is popularly called —
பட்டாசு, தீப்பெட்டி, அச்சுத் தொழில்களுக்குப் பெயர் பெற்ற சிவகாசி எவ்வாறு அழைக்கப்படுகிறது?
(A) Manchester of South India / தென்னிந்திய மாஞ்சஸ்டர்
(B) Detroit of India / இந்தியாவின் டிட்ராயிட்
(C) Kutty Japan / குட்டி ஜப்பான்
(D) Textile Valley / ஜவுளி பள்ளத்தாக்கு
✅ Answer Key & Explanations | விடைகள்
Q1 — Answer (B): RINL’s Vizag plant is the only shore-based integrated steel plant in India.
RINL-இன் விசாக் ஆலைதான் இந்தியாவின் ஒரே கடற்கரை அருகில் அமைந்த ஒருங்கிணைந்த ஆலை.
Q2 — Answer (C): Bhilai and Bokaro had Soviet collaboration; Rourkela had West German and Durgapur British.
பிலாய், பொகாரோ — சோவியத்; ரவர்கேலா — மேற்கு ஜெர்மனி; துர்காபூர் — பிரிட்டன்.
Q3 — Answer (C): NICDP covers 11 corridors, implemented by NICDC under DPIIT.
NICDP-இல் 11 வழித்தடங்கள்; NICDC செயல்படுத்துகிறது.
Q4 — Answer (B): Jaipur-Ajmer is a MINOR industrial region, not one of the eight major regions.
ஜைப்பூர்-அஜ்மேர் ஒரு சிறு தொழில் பகுதியே தவிர பெரும் பகுதி அல்ல.
Q5 — Answer (C): Sivakasi is nicknamed Kutty Japan. Coimbatore is the Manchester of South India and Chennai the Detroit of India.
சிவகாசி — குட்டி ஜப்பான்; கோயம்பத்தூர் — தென்னிந்திய மாஞ்சஸ்டர்; சென்னை — டிட்ராயிட்.

💡 Memory Tips | நினைவுக் குறிப்புகள்
BBR-D — whose help built which plant? Bhilai and Bokaro = both begin with B = Bolshevik = Soviet Union. Rourkela = Rhine = Germany. Durgapur = Dominion = Britain.
BBR-D: பிலாய், பொகாரோ — இரண்டும் B = போல்ஷெவிக் = சோவியத். R = ரவர்கேலா = ரைன் நதி = ஜெர்மனி. D = துர்காபூர் = டொமினியன் = பிரிட்டன்.
Mills in a row: 54-55-07. Cotton 1854 Mumbai, Jute 1855 Rishra, TISCO 1907 Sakchi. Read it like a lock combination — cotton first, jute next year, steel half a century later.
54-55-07: பருத்தி 1854 மும்பை, சணல் 1855 ரிஷ்ரா, TISCO 1907 சாக்சி — ஒரு பூட்டு எண் போல.
Three Manchesters, one Detroit. Manchester of India = Ahmedabad. Manchester of South India = Coimbatore. Detroit of India = Chennai. City of cotton goes west, city of cars stays east.
மாஞ்சஸ்டர்: இந்தியா = அகமதாபாத்; தென்னிந்தியா = கோயம்பத்தூர்; டிட்ராயிட் = சென்னை.
8 major, 13 minor, 11 corridors, 12 smart cities. Say it as a countdown with one jump: 13, 12, 11, 8 — minor regions, smart cities, corridors, major regions.
8 பெரும், 13 சிறு, 11 வழித்தடம், 12 சிட்டி நகரம் — 13, 12, 11, 8 என உருட்டுச் சொல்லுங்கள்.
Cane can’t wait. Sugarcane loses sucrose within 24 hours of cutting, so the mill goes to the field — the one-line reason sugar is a raw-material-oriented industry.
கரும்பு காத்திராது: வெட்டிய 24 மணியில் சர்க்கரைச் சத்து குறையும் — ஆலை வயலுக்குச் செல்கிறது.

🔗 Previous Year Questions | கடந்த ஆண்டு வினாக்கள்
TNPSC Group 2 / Group 4: “Which steel plant was established with the collaboration of West Germany?” — Answer: Rourkela. The four-way collaboration list is asked in some form almost every cycle.
TNPSC குரூப் 2 / 4: “மேற்கு ஜெர்மனி ஒத்துழைப்புடன் அமைந்த எஃகு ஆலை எது?” — ரவர்கேலா.
TNPSC Group 1 Prelims: “The Integral Coach Factory is located at ___” — Answer: Perambur, Chennai. Expect ICF, Salem Steel and Neyveli as a Tamil Nadu industry cluster of questions.
TNPSC குரூப் 1: “ஒருங்கிணைந்த பெட்டி தொழிற்சாலை எங்கு உள்ளது?” — சென்னை பெரம்பூர்.
TNPSC VAO / Group 4: “The first cotton textile mill in India was started in the year ___” — Answer: 1854, at Mumbai. Often paired with the jute mill of 1855.
TNPSC VAO / குரூப் 4: “இந்தியாவின் முதல் பருத்தி ஆலை தொடங்கிய ஆண்டு?” — 1854, மும்பை.
📘 ATHIYAMAN ACADEMY — அதியமான் அகாடமி
Daily TNPSC notes in English & Tamil — Group 1, 2, 2A, 4 and VAO
தினமும் தமிழ் மற்றும் ஆங்கிலத்தில் தேர்வுக் குறிப்புகள்
📞 8681859181

Doubt in this topic? / சந்தேகமா? Ask us on WhatsApp →

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.

error: Content is protected !!
0
0
Your Cart
Your cart is emptyReturn to Shop